Jump to main content
Black Week: 25% off EVERYTHING – reduced items too! The discount will be deducted directly from the total in your shopping basket.
 For women | For men
Following Microsoft’s announcement to reduce support for Internet Explorer 11 even further, along with their recommendation to switch to Microsoft Edge, we, too, have now decided not to support this browser any longer. This was a conscious decision, on the one hand in order to protect you and your data, and on the other to ensure that we can implement new technologies that Internet Explorer 11 does not support.

Back

Tents & Groundsheets

Waterproofing a tent: when is the right time?

Escape into the countryside and spend the night under the stars! There’s nothing quite like it. Consequently, it is worthwhile waterproofing your tent so that any wind or rain will not get in the way of these plans. Then you can rest assured that you are protected in your tent no matter how heavy the downpour.
Please note: You will not need to waterproof a new tent. This has generally already been done by the manufacturer. If you want to be certain that this is the case, then take a quick look at what has been written in the product description. However, every tent needs a refresh after a while. A tent will gradually lose its protective coating after being subjected to rain, wind and rubbing during transport.
Moreover, UV radiation will take its toll on the material and make it age more quickly. It makes sense to waterproof a tent after every two to three years of use. And it is really easy to do. Follow our step-by-step guide.

Step 1: Test the extent of waterproofing still in the tent’s material

A couple of days before you set out on your next camping trip, check that the tent is still water-repellent. Pitch the tent in the open. The tarpaulin should be taught. Use a garden hose or watering can to spray the tent with water. If the water drips off the material in small droplets, then you can rest assured that there is still sufficient waterproofing in the material. By contrast, if the material appears to soak up the water, thereby creating a film of water and the inside of the tent becomes wet, it is high time to waterproof the tent once more.

Step 2: First of all, thoroughly clean the tent

Pitch the tent in the garden or somewhere out in the open. Check to make sure there is no noticeable damage. Everything as it should be? Great. Use a vacuum cleaner to remove as much dust as possible. Then take a damp cloth with a little washing-up liquid and clean the material.

Step 3: Choose a suitable waterproofing product

As far as the material is concerned, tents are usually made of synthetic materials such as polyester, and very rarely from materials like cotton. Use a waterproofing product that is especially for the material in question. You generally have a choice between a waterproofing spray and a liquid.
You will need to spray from a distance, and the liquid waterproofing product normally needs to be diluted. A spray is normally easy to use and the contents will penetrate the pores of the material. If using a waterproofing liquid, you will need to ensure that it has been applied evenly, hence this will take a little longer.

Step 4: Seal the seams if necessary

The seams are the weak points of a tent. Did any of them have leaks when you carried out step 1? Then it would be wise to seal them before waterproofing the tent. Use a so-called ‘seam sealer’ for this. This is a special adhesive that you apply to the outside of faulty seams and leave to dry.

Step 5: Apply a waterproofing method/product

Is the tent clean and dry? Then it can now be waterproofed. First of all, ensure that you have fastened all zips, buttons, etc. Now spray the tent with the waterproofing spray approx. 20 to 30 centimetres away from the surface. Don’t rush this job, make sure that you have sprayed the tent all over evenly. If your waterproofing product is a liquid, dilute it in line with the manufacturer’s instructions, and then apply using a sponge or cloth. Irrespective of whether you have chosen a spray or liquid: waterproof your tent in the outdoors only. We would recommend that you wear a mask to prevent inhalation of any possible fumes.

Step 6: Leave to dry

Allow the waterproofing product to take effect and dry. You can generally gear the length of time it needs to dry from the manufacturer’s instructions on the product. Is it dry? Then repeat the test that was explained in Step 1. If some parts of the tent do not appear fully waterproofed, repeat the procedure several times. Always ensure that the tent is dry before repeating the process. No water has penetrated the tent? Then you can set off on your next outdoor adventure.

Back

Contact and help

Do you have any other questions or do you need individual assistance?
If so, please get in contact with our customer service team:

Free hotline: Mon-Sa 08:00-20:00 (CET)
{{jwsdwPicker.cartPicker.selectedBonusProductLineItems[0].product_name}}

Success! A Gift has been added to your order.

Added to your basket

Go To Basket ({{jwsdwPicker.cartPicker.totalItems}})
Contact & feedback
Email
Help-FAQ
00800-96537546
00800-WOLFSKIN
Live-Chat
Free hotline: Mon-Sa 08:00-20:00 (CET)
Scan